Anyone In the Salt Lake City area?
I am a scoutmaster, I want to build one for myself. And was thinking what a neat idea it would be to see my troop actually doing the research,construction, and programming. But first I would like to...
View ArticleRe: Anyone In the Salt Lake City area?
What a great idea! My scouting experiences have been invaluable, but the most "technical" thing we've ever done is weld up some go-carts. Unfortunately I won't be able to help you much unless you're...
View ArticleRe: Anyone In the Salt Lake City area?
Apparently I'm the closest person to you but I'm in Klamath Falls Oregon and I don't have a fully functional repstrap quite yet. Texas is the other place. Here is the new map that was just put up with...
View ArticleRe: Anyone In the Salt Lake City area?
I am about 45 minutes south of SLC but I have only just discovered this site and am going to be looking into the possibility of building my own. If I can find the appropriate components for the right...
View ArticleRe: Anyone In the Salt Lake City area?
(I'll be moving this thread to the Utah, Salt Lake City RepRap User Group on Monday Evening.) It will be over here: [forums.reprap.org]
View ArticleRe: Anyone In the Salt Lake City area?
Is anyone out there still interested? This looks like an awesome project not sure about the time and money I am going to have to figure that one out with the wife but I was curious if any of the above...
View ArticleRe: Anyone In the Salt Lake City area?
I just got my laser cut Rep(St)rap working! I'm in Utah valley. See the RepRap category of my blog: [shane.willowrise.com] If there are others in Utah interested in this project, we should get...
View ArticleRe: Anyone In the Salt Lake City area?
I am interested. Here are my general skills, mb.thewellbeinghalo.com and my workload is weekends off. I recently moved up to SLC from Lehi to be closer to everything including the office where I work....
View ArticleRe: Anyone In the Salt Lake City area?
I'm in the Sugarhouse area and have been working on a mcwrire'ish repstrap as time allows.(which isn't much, progress is slow) I've got an extruder and one axis done, and have been making myself...
View ArticleClose enough to Reno to come demo for worldcon?
I'm helping run the World Science Fiction Convention, which is in Reno, NV August 17-21, 2011. I'm looking for Reprap-ers in the area who might be interested in bringing a rig to the con. Drop me an...
View ArticleAnyone in Utah Valley?
I would like to build one for myself. I was hope someone can help me to get one or make parts for me. Reid
View ArticleRe: Anyone In the Salt Lake City area?
I am very interested in building a reprap. I already have already built a CNC router and a phlatprinter. It shouldn't be very hard to build an extruder and attach it to the Z axes of my router and...
View ArticleRe: Anyone In the Salt Lake City area?
Glad to hear about your undertaking Mike. RepRaps are a lot of fun and from the sounds of things it should be a relatively simple task for you. As far as I am aware there are currently 3 or 4 working...
View ArticleRe: Anyone In the Salt Lake City area?
I have just purchased the Mendel printed plastic parts off of Ebay. It comes with Adreains geared head extruder. It should be here in a few days. I am currently looking for the bill of materials on...
View ArticleRe: Anyone In the Salt Lake City area?
I now have a nearly finished Menel Prusa, I am currently in calibration mode. I have made my first parts and am working on improving the print quality, speed, layer height, and infill, ect. I would be...
View ArticleRe: Anyone In the Salt Lake City area?
Hi Mike, I'm looking at building my own Prusa Mendel. I have looked around quite a bit and was wondering where I might find the best deals for parts. At the moment I'm looking at [mixshop.com] for...
View ArticleRe: Anyone In the Salt Lake City area?
Sure I would be happy to help in anyway I can. Just so you know my quality isn't very good yet. Lots of work yet to do.
View ArticleRe: Anyone In the Salt Lake City area?
So I've done nothing but looked around so you're lightyears ahead of me. Can I get your email address instead of going through the forum?
View ArticleRe: Anyone In the Salt Lake City area?
Yes my email is BosenMike_99@yahoo.com I have only had my Prusa Mendel working for about a week. I still have some bugs to work out. I bought Makerbot electronics. I am using replicatorG software. I...
View ArticleRe: Anyone In the Salt Lake City area?
Didnt think there were any other SLC people here. I live just off campus at the U. Have a Mendel that I'm slowly working through the calibration.
View ArticleRe: Anyone In the Salt Lake City area?
Hey bajasam96, I found a clalabration calculator and it took a lot of the guesswork out of the setup of my Mendel prusa. Try it you will like it. [calculator.josefprusa.cz]
View ArticleRe: Anyone In the Salt Lake City area?
Ah yes I've used that one to verify mine. My real task is working through all of the Skeinforge settings to get decent quality prints. I can manage ok prints, but getting good prints is proving to be...
View ArticleRe: Anyone In the Salt Lake City area?
Wow, this is awesome. Just found RepRap on Kickstarter.com. The whole kit is a little more than I can spend right now, but is anyone here selling the whole set of printed parts? :) Maybe I'll build it...
View ArticleRe: Anyone In the Salt Lake City area?
I've been selling a handful of sets on ebay. None ready now though, I need to order some more plastic before I can do any more sets. SW
View ArticleRe: Anyone In the Salt Lake City area?
Hey everyone! Anyone still watch this page? I'm in Provo. Could use some help printing a few parts for a 3DR. I just got a printer from a kickstarter launch but it doesn't perform anywhere near as...
View Article
